By Origin:

  • Import  (1)
  • USA  (35)
  • By Price Range:

  • Under $5  (3)
  • $5 - $10  (1)
  • $10 - $25  (14)
  • $25 - $50  (16)
  • $50 - $100  (17)
  • Need Help? Give us a call or click for live chat.
    1-800-521-3420 Store Hours
    Live Chat

    parallels

    Show:
    Page 1 2 3 4 5 6 7 of 7 | Next
    Order By:
    View: Grid | List
    RDX 20-Piece Thin Style Parallel Set
    Made of high grade alloy steel, hardened and ground from 1/8-inch stock. Two holes in each parallel. Includes fitted case. Set contains one pair each of the following: * 1/8" W x 1/2" H x 6" L; 13/64" hole size * 1/8" W x 5/8" H x 6" L; 1/4" hole size * 1/8" W x 3/4" H x 6" L; 5/16" hole size * 1/8"…
    $49.00
    item # 1291-0145
    RDX 8-Piece Milling & Drilling Parallels
    Set workpieces to needed height with vise in seconds. Thin bars in four sizes. Complete set of eight parallels. The 5/32-inch thickness enables drilling through work near edges without hitting parallels.
    $12.95
    item # 1291-0015
    RDX 1/4
    High grade alloy steel, hardened and ground. Two holes in each parallel for easy setup. Includes case.
    $63.00
    item # 1291-0255
    Suburban Tool Magnetic Sine Plate
    …against dirt and liquids. Removable on/off handle, locking strap, and two rails included. Sine plate is steel hardened to Rc 58-62. Squareness, parallelism and roll center distances between .0002 and .0003 inch. Gage block roll has two .200 minute steps for setting small angles with standard gage…
    $1222.35 - $2755.35
    RDX 9-Piece Wavy Parallel Set
    …Other features:* Ideal for clamping group of flat workpieces* Can readily be used as elastic shims* Thin and fragile pieces can be secured without damage by utilizing parallels' spring pressure* High quality spring steel; hardened, stress relieved and precision ground* Fitted case included
    $29.00
    item # 1291-0280
    RDX 20-Pair Ultra Thin Parallel Set
    Contains 20 pairs of 1/32-inch thick parallels in fitted case. Hardened to 50 Rc.
    $49.00
    item # 1291-0155
    RDX Angle Plate
    Made of steel, hardened and ground flat, square and parallel. Tapped holes on all models are either 1/4-20 or 3/8-16 to enable use of standard, readily available clamping accessories.
    $53.50 - $99.00
    RDX 1/2
    Made of hardened and ground, high grade alloy steel. Includes box.One pair each of the following sizes:* 1/2" W x 7/8" H x 6" L, with 5/16" hole * 1/2" W x 1-1/8" H x 6" L, with 3/8" hole* 1/2" W x 1-5/8" H x 6" L, with 7/16" hole* 1/2" W x 1-5/8" H x 6" L, with 1/2" hole* 1/2" W x 1" H x 6" L, with…
    $67.50
    item # 1291-0180
    RDX Parallel Clamps
    Desirable for holding or clamping small work together when drilling, welding, assembling, etc. Special hardened steel for utmost performance. Spring screw clip. Conforms to government specs.
    $3.75 - $18.00
    Suburban Tool V-Blocks
    Parallel, square and central to within .0002 inch. Each block comes with one clamp. Made of steel hardened to Rc 58-62. Sizes other than those listed available by special order.
    $208.70 - $2352.25
    RDX Precision Sine Tilt Vise
    Surfaces are hardened and ground, square and parallel to .0004 inch. Vise tilts a full 60 degrees, and the angle can be set to the desired degree with four knurled knobs. Three sets of thread holes make this vise rigid at 0, 45 and 60 degrees. Slots of 1/2 inch in the front and the back of the base…
    $119.00 - $139.00
    RDX Slotted Webbed End Angle Plate
    High tensile cast iron seasoned against distortion. Ground square and parallel on flat surfaces. Inside surfaces painted gray. Note on Order Nos. 2128-0020 and 2128-0022: This item's weight exceeds the UPS shipping standard; therefore there will be UPS surcharges added to the estimate you have…
    $12.00 - $107.00
    Showing item 1 - 12 of 74 items found
    Site Search by  Site Search powered by SLI Systems