By Category:

By Origin:

  • USA  (8)
  • By Price Range:

  • $5 - $10  (1)
  • $10 - $25  (3)
  • $25 - $50  (1)
  • $50 - $100  (2)
  • $100 - $250  (7)
  • Need Help? Give us a call or click for live chat.
    1-800-521-3420 Store Hours
    Live Chat

    hole locator

    Page 1 2 of 2 | Next
    Order By:
    View: Grid | List
    Spellmaco Blind Hole Spotter Set
    A fast, easy way to locate opposite centers. When holes do not extend through material, such as for dowel pins or perforating punches, spotters get the job done simply. Correct size spotter can be used in threaded, drilled or reamed holes. The 108-piece set has six each of 18 popular spotter sizes…
    item # 6519-9960
    Jet Vari-Speed 15
    …precise hole depths* Safety collar Note: Due to this product's weight, shape, size or special handling requirement, it can be shipped via motor freight only. Please indicate in the comments section of your order whether this item will be shipped to a commercial or residential location, and if you…
    item # 3016-4215
    Trinity Brand Perfect Punch & Die Sets
    …a 1/4-inch hole up to 3-3/8 inches from the edge of a shim or gasket. All other sets are limited to less than 3/4 inch from the edge for the same size hole! The set's larger punches are located closer to die center for greater stability when more force is needed to punch larger holes. Plastic top…
    RDX Push-Pull Clamp
    Precision machined malleable base and plastic hand grip. Rust resistant black oxide finish with cadmium lubricated plunger.Maximum slip fit between plunger and base long bearing hole is 0.003 inch. Use as pin locating gage as well as clamping device.
    $10.00 - $36.00
    General Tools Ultra Rule Flexible Stainless Steel Ruler
    Micro-fine marking holes and slots at every position to instantly locate sharp pencil point or scriber exactly where you want it. Zero uncertainty. Mechanical pencil with 0.5-millimeter point included with every purchase.
    $9.15 - $13.80
    Micro 100 Retaining Ring Groove Cutters
    Solid carbide, right hand style. Lockdown flat automatically locates tool on center. Tolerances: shank, -.0001-.0002 inch; minimum hole diameter, +.000-.005 inch; maximum hole depth, +.050-.000 inch; overall length ±1/64 inch.
    $31.45 - $79.98
    RDX Piloted Spindle Tapper
    …thread a drilled hole manually at one machine location without moving the workpiece. Separate stands, guides or similar devices are not needed. The tap follows the correct lead, assuring true alignment. Accurate threads are produced because tapper makes it easy to hand tap a hole in the same…
    $12.95 - $16.95
    Mitutoyo Uni-Mike Interchangeable Anvil Type Micrometers
    * Measures hard to reach locations, such as from a hole or slot to an edge* Measures tubing thickness, shoulder edge distance, rivet head height, etc. with interchangeable anvils* Carbide tipped spindle face* Positive locking clamp* Friction thimble for exact and repetitive readings* Includes fitted…
    $198.00 - $232.10
    RDX Quick Setting Toolmaker's Vise
    * Quickly locate workpiece securely and accurately with this precision vise* Holes and locking set screw provide adjustable positions * Surfaces hardened and precision ground square* Parallel to an accuracy of .0002 inch* Ground V-way in sliding jaw* Base and front jaw are one-piece all steel…
    $59.00 - $89.00
    …improve accuracy. Strong magnet with 45 pounds of holding power. Zinc die-cast housing and five different locations for mounting accessories. Three positions with 1/4-20 thread for lug mounts. One tapped hole with 10-32 thread, and one 3/8-inch reamed hole. USA-made Mighty Mag or RDX base available.
    $19.95 - $29.95
    Starrett Digital Electronic Tube Micrometer
    * Measures wall thickness of tubing and other parts with cylindrical walls, and from a hole (minimum size of 3/16 inch) to an edge* Output capability to Starrett SPC Plus™ hardware and software and to IBM compatible PCs* High contrast LCD readout with large numbers* Auto shutdown after two…
    item # 1240-1595
    Suburban Bolt-On Vacuum Sine Plate Chuck
    Provides excellent means to hold non-magnetic workpieces for light machining or grinding. Ideal for Suburban sine system. Three holes for mounting vacuum gage, relief valve and hose. Back and end rails for positive workpiece location. Includes gage and valve.
    item # 1701-0470
    Showing item 1 - 12 of 23 items found
    Site Search by  Site Search powered by SLI Systems