By Origin:

  • Import  (1)
  • USA  (5)
  • By Price Range:

    Need Help? Give us a call or click for live chat.
    1-800-521-3420 Store Hours
    Live Chat

    Angle Block

    Page 1 2 of 2 | Next
    Order By:
    View: Grid | List
    RDX 0-60° Precision Angle Block
    Fast, simple and easy to use for drilling, milling and setup applications. Adjustable 0 to 60 degrees by locking bottom hex screw. Hardened to Rc 50-55.
    item # 2127-0020
    RDX 10-Piece Angle Block Set
    Simple, quick angle setups. Eliminate calculations and avoid errors. Lightly magnetized for better holding. Manufactured from oil hardened, precision ground steel.
    item # 1291-0080
    RDX Solid Angle Plates
    Hardened and ground steel. Precisely ground angles for setups in tooling, production and inspection. Holes for easy mounting.
    item # 2127-0025
    Suburban Tool Angle Blocks
    …accurate and direct means for setting or checking angles. Eliminates calculations to help avoid errors. Blocks in 1-degree increments to 5 degrees; then 5-degree increments to 30 degrees. By adding the optional 1/4 and 1/2-degree blocks, nearly any angle can be set in 1/4° increments. Precision…
    $33.10 - $296.85
    CENTER IT Drilling Jig for Round Stock
    …table, run the bit down (with motor off) to hold it centered on the bit, then bolt it to the table. Clamping tube is not necessary, since the angled flats kept it centered. Holes automatically will be centered on tube, with no center punching required. If tubing is too large to drill in a single…
    item # 1290-0200
    RDX Precision V-Block & Clamp
    More versatile than other V-blocks. Can be used on either side, end and base. Ground and hardened for parallelism and squareness. Threaded holes on each side and base attach to angle plates.
    item # 1290-0065
    RDX 6
    …dividing plates* One adjustable tailstock* Crank handle* One each sector and sector spring* Four T-slot bolts and flange nuts* One pair step blocks* One pair serrated end clamps Note: This item's weight exceeds the UPS shipping standard; therefore there will be UPS surcharges added to the estimate…
    item # 1990-0005
    RDX Precision V-Block
    * Chrome steel, hardened and ground* Accurate enough for layout and surface plate use* Square, parallel and concentric within ±.0001 inch * Models 475-015 and 475-020 can be set up on side or bottom angles* 90-degree V-angles
    $22.00 - $79.00
    Bessey Welder's Angle Clamp
    …material thicknesses at a 90-degree angle* Ideal for plates, angle iron, square tubing, pipe, channel iron, etc.* Copper plated Acme screw protects against weld spatter* Slotted base holes mount easily on work table* Jaws and base machined at precise right angles to each other* Swivel-mounted…
    $136.00 - $215.00
    RDX Universal Angle Block Set
    No sine vise, sine plate, angle vise, angle chart or block gage needed. Consists of 10-, 15- and 30-degree V-blocks; 1-, 2-, 3-, 4- and 5-inch angle plates; and fitted case. Hardened to Rc 45-50, with all ground finish.
    item # 1291-0082
    RDX Radius & Angle Dresser
    …over two pins or inserting gage block* Easily determine inside or outside radius by sliding dowel pin to right for concave and left for convex* Four x 90° graduation in full 360° circle and 6-minute vernier reading* One push/pull knob for radius and angle control and safer, faster operations
    item # 2800-0300
    Suburban Tool Sine Plate
    Minute angle step 0.2 is built into gage block roll, eliminating step in base plate. Two hardened and ground side rails and one locking strap included. Strap always remains below top surface. Large hinge pins for extra strength. Notes on Order No. 1701-0025: This item's weight exceeds the UPS…
    $530.10 - $1561.70
    Showing item 1 - 12 of 16 items found
    Site Search by  Site Search powered by SLI Systems