Need Help? Give us a call or click for live chat.
1-800-521-3420 Store Hours
Live Chat

General Tool

Order By:
View: Grid | List
Ideal for toolmakers, machinists and mechanics. Front has machine screw size tap drill chart for recommended 75 percent depth thread. Back has decimal equivalents table. Covers National Fine, National Coarse, American Standard Pipe, and metric threads. Convenient 6-inch rule on bottom. Stainless steel.
item # 6800-1160
For gaging nonferrous wire and metals, such as copper, brass and aluminum. American standard wire sizes 0 to 36 on front. Decimal equivalents stamped on reverse. Heavy gauge hardened and tempered steel with satin finish.
item # 6800-1185
Accurately measure and mark outside, inside and sloped surface angles. Hardened steel base is grooved on both sides to deliver accurate ruler settings at 30-, 45- and 60-degree angles. Spring tension nut eases depth and angle measuring by securing rule in milled slot at 90-degree angle to base.…
item # 6800-1210
A useful guide for identifying drill bit sizes and extremely helpful when working with older, unmarked drill bits, as well as ones too small for markings. Heavy gauge, corrosion resistant, stainless steel is heat treated and machined to close tolerances. Etched graduations are black filled for high…
item # 6800-1180
Gages help to quickly and accurately identify drill bit sizes. They also are extremely useful with older, unmarked bits or ones too small for markings. Each heat treated, heavy steel gage is machined to close tolerances for spot-on accuracy. Hole sizes and decimal equivalents permanently etched in…
$12.70 - $13.05
* Quick way to identify machine screws, bolts, wood screws, standard size rivets and common cotter pin sizes up to 5/16 inch (8 mm)* 3-inch scale on top to check screw lengths* Provides required drill diameters for tap and hole sizes* Threaded holes show threads per inch; unthreaded indicate size…
item # 6800-1195
Stainless steel tool provides five separate functions:* Drill point gage used to check 59-degree angle points* Bevel protractor used for measuring and laying out angles * Center finder locates shaft or circle centers* Circle divider (up to nine equal parts) used for dividing circles into sectors,…
item # 6800-0075
Accurately determines thickness of uncoated sheet metal, plate iron and steel. U.S. standard sheet metal sizes from 0 to 36 on front and decimal equivalents on back. Heavy gauge hardened and tempered steel with satin finish.
item # 6800-1190
Showing item 1 - 8 of 8 items found
Site Search by  Site Search powered by SLI Systems