| |
- Easy, open access to drill chuck for bit changing
- Adjustable depth stop
- Chuck key/hex wrench for bit and chisel changing
- Large cast iron base with center through hole
- Adjustable rack and pinion fence and rack and pinion head raising and lowering
- Mortising head column can be turned 180 degrees and remounted for off-table mortising
- Adjustable dovetail way on mortising head
- Tool and chisel tray
- Gas-filled head stabilizer
- Height attachment adds 1 3/4 inches of capacity under head
- Multi-position feed lever
- Machine comes with tool and chisel holder; riser block; instruction manual; and four mortising chisels, sizes 1/4, 5/16, 3/8 and 1/2 inch square, with 5/8-inch maximum diameter shank); and bits
|
| |
| Motor: | 1/2 hp, 1,725 rpm | | Travel: | Head, 5" | | Dimensions: | Head to base, 9-3/8"; chisel center to fence, 3-3/4"; under hold down, 3-3/4" | | Base: | 16.25" x 13.5" | | Chuck Size: | 3/8" | | Stroke: | 5" max. | | Overall Dimensions: | 30" H x 13.5" W x 16.25" D | | Fence: | Each side, 2-15/16" x 5-13/16"; overall, 13-5/8" L | | Net Weight: | 55 lbs. |
|
| |
|
|
