| |
- 8-inch three-jaw chuck and adapter
- 12-inch four-jaw independent chuck and adapter
- 12-inch face plates
- Steady and follow rests
- Thread chasing dial
- MT 6/2 sleeve and MT 4 center
- Oil gun, one set of wrenches and operating manual
- Cross adjustment, ± 1/2 inch
|
| |
| Dimensions: | 76-1/2 x 33-1/2 x 52" | | Cross Slide Travel: | 8-1/4" | | Center Height: | 20.5" | | Coolant System: | Pump: 1/8 - 3 hp | | Spindle Speed(s): | 16 changes, 45-1,800 r/min | | Spindle Taper: | 6MT | | Spindle Nose: | D1-6 | | Distance Bet. Centers: | 40" | | Longitudinal Feed: | 0.002" - 0.067"/rev | | Thread: | Metric, 39 kinds (0.2-14 mm); inch range, 45 kinds (2-72 TPI) | | Spindle Bore: | 2" | | Motor: | 3 & 5 hp, 2 speed, 220V, 3-ph. | | Swing: | 16" over bed; 10" over cross slide; 23" over gap | | Tailstock: | 2" dia. sleeve; 4MT taper | | Bed: | 10" W | | Gap Length: | 10" | | Compound Travel: | 4" rest | | Pitch: | Lead screw, 4 TPI; diametrical range, 21 kinds (8-44 DP); module range, 18 kinds (0.3 - 3.5 MP) |
|
| |
|
|
