| |
| Standard features: 6-inch three-jaw chuck, 8-inch four-jaw chuck, 2MT live center, 2MT and 3MT dead centers, center sleeve, toolbox, steady and follow rests, thread change gears, 8-inch face plate, four-way turret and 1/2-inch drill chuck. Note: Appearance may vary from picture. |
| |
| Tailstock Taper: | 3MT | | Motor: | 1 hp, 110V AC, mag. switch, 1 ph. | | Distance Bet. Centers: | 36" | | Bed: | 47" L x 7-5/32" W | | Compound Travel: | 3-1/4" | | Lead Screw: | 7/8" dia. x 8 TPI | | Spindle Mount: | D1-4 | | Swing Over Cross Slide: | 7" | | Hole Through Spindle: | 1-3/8" | | Net Weight: | 850 lbs. | | Cross Slide Travel: | 5-7/8" | | Feed Rod: | 3/4" dia. | | Swing Over Bed: | 12" | | Tailstock Travel: | 4" | | Saddle Travel: | 33" | | Spindle Taper: | 5MT | | Spindle Speed(s): | 70-1,400 rpm | | Thread Size: | 40 inch (4-112 TPI); 29 metric (0.2-4.5) |
|
| |
|
|
