| CENTER IT is a tool for drilling pipe and other round objects. The V-block bolts to the drill press table and enables the drilling of round pieces, parallel and centered. The grooves on the outer sides eliminate slippage.
To use, simply place CENTER IT on the drill press table, run the bit down (with motor off) to hold the jig centered on the bit, then bolt the jig to press table. No clamping of the tube is necessary, since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center punching required.
If tubing is too large to drill in a single operation, it can simply be turned over. Use it for tubes and round stock. Set in drill press, bolt down and the bit always hits center. CENTER IT is made of heavy extruded aluminum. |
